FAQ’s
RAPIX アドレス指定により、ユーザーは DALI ライン上の DALI ユニットのアドレスを識別して再割り当てることができます。
設置者は、モバイル デバイス (スマートフォン、タブレット、iPADなど) を使用して建物内を歩き回り、DALI ライン上の DALI 制御装置を見つけてアドレス指定できます。
通常、1 人が ID と短いアドレス指定を 2 人で行う場合の半分の時間で完了します。
はい、各 eHub に接続されているセンサーとスイッチを含め、単一の DALI ラインで最大 24 個の RAPIX eHUB をコミッショニングできます。
これらのアプリケーションの詳細については、 「RAPIX eHUB DALI Boardroom Lighting Control Solution」を参照してください。
Yes, you can commission up to 20 RAPIX Occupancy Sensors on a single DALI line. This includes the integrated movement sensor, light level sensor and switch input.
はい、単一の DALI ラインで最大 20 台の RAPIX ユニバーサル スイッチ入力デバイスをコミッショニングできます。
RAPIX Addressing, along with it’s big brother RAPIX Integrator, can detect, work with and commission DALI Device Type 8 (Colour) Control Gear.
Setup is easy using colour pickers and other tools. For DALI scenes, rapid set facilities are available to allow colour gradients to be very quickly and easily created.
A PC that must be running Windows 8.1 or higher and has Wi-Fi capabilities. For more information click HERE.
Any Mobile device that is able to display Web Pages (HTML5) and has Wi-Fi capabilities. The mobile device can run Apple, Android, MS Windows O/S etc. A Wi-Fi router is required to create the RF network.
RAPIX Addressing is dedicated to the open standard DALI system.
Yes it will work with DALI Emergency (EM) products.
RAPIX Addressing works with all DALI Control Gear products that are fully compliant to the relevant DALI standard – these will have the official DALI symbol marked on them. Products that are DALI ‘Compatible’ will not have that symbol – they will probably work with RAPIX Addressing, but there may be some features or functions that are not available.
YES!
With firmware version 3, the RAPIX eHub supports up to 8 schedules. Each schedule can support an event to be run at a particular time, on one or more days of each week.
Schedules can also be enabled or disable over DALI.
For more complex schedules, a RAPIX Zone Controller is recommended.
YES!
The eHub supports plug-and-play for peripherals, so you can remove an LCD switch and connect a modular switch instead (or the other way around). The button functions will be exactly the same, with no need for re-configuration.
- A Zone Controller. Date/time is transmitted over DALI.
- An NTP server. Date/time transmitted over ethernet. The eHub must be configured with the IP address of the NTP server.
- An NTP broadcast. Date/time is transmitted over ethernet by any computer that can run the windows service. The eHub needs only to be set up to use NTP broadcast.